SHANGHAI OCEANHOOD OPTO-ELECTRONICS TECH CO., LTD.

手机官网

|

简体中文

|

English
Products
Products Center

Location: OCEANHOOD Home > Products

Spectrometer

Micro Reflectance spectral measurement Instrument

Micro spot and reflectance measurement The max range can cover 350-1700nm mapping

The minimum spot diameter of the reflection fiber probe for measuring the reflectivity of the sample can only reach about 1-2mm. The spot diameter limits the size of the sample and the spectral spatial resolution. To obtain the spectral information of the sample at a smaller scale, the usual practice is to For use with microscope systems. Micro-area reflectance spectroscopy measurement system combines spectral analysis technology with microscopic optical path, which can collect spectral information of samples on the micron scale, and is widely used in the study of spectral properties of materials in physics, chemistry, biology and other industries.
The system adopts the optical fiber confocal illumination method. Compared with the traditional Kohler illumination, the confocal illumination method can obtain a smaller sampling diameter, that is, it has a higher spatial spectral resolution. As shown in the figure, the light source is connected to the microscope system through the optical fiber, and the spot size is compressed to the micron level through the microscope objective lens and concentrated on the sample plane. , the end face of the receiving fiber, the plane of the imaging camera, and the four sides of the sample plane belong to a conjugate relationship, so that high-precision in-situ spectral measurement can be achieved.
In addition, a spectral channel is reserved in the micro-area reflectance conversion module used in the system. This channel can support the addition of transmittance measurement, Raman spectroscopy or fluorescence spectroscopy on the basis of reflectance spectroscopy. , to achieve multi-spectral comprehensive measurement.

PL980 near Infrared two-Zone fluorescence Measurement system

Fluorescence spectrum analysis of nanomaterials can be carried out Good reproducibility and fast measuring speed Good collection efficiency and reliability

PL980 near-infrared two-zone fluorescence measurement system is a set of spectral system which can be used for fluorescence spectrum analysis and development of nanomaterials. The system has good reproducibility, fast measurement speed, good collection efficiency and reliability, and can be widely used in communication, chemical, biomedical, material analysis and other fields.